This product is a 25% solids solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. CP 343-3 has a good solvent tolerance for a wide range of solvents. The higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.
HumenChem Product Page
This product is a 50% solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. CP 343-3 has a good solvent tolerance for a wide range of solvents. Higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.
CP 349W is a water dispersion of a chlorinated polyolefin. Oil in water-type emulsion. It contains 5 wt % ethylene glycol, and has 2-amino-2-methyl-1-propanol as the neutralizing amine which makes it more compatible with other waterborne resins and more useful as an additive. Recommended for promoting adhesion to untreated polypropylene-based substrates.
Eastman Cellulose Acetate Butyrate CAB-381-0.1 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels are needed. CAB-381-0.1 is used when lower viscosity for higher solids formulations and increased toughness with excellent surface hardness is desired. It is used in automotive basecoats for metallic flake control and is supplied as a dry, free-flowing powder.
Eastman™ MPK, UHP (Ultra High Purity) is a medium-evaporating, urethane grade, highly active solvent for most synthetic resins. It is ideal as a letdown solvent for high solids, air-dry resins used in low VOC alkyd and polyester/urethane coatings. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.
Eastman™ Methyl Acetate - High Purity is an active, urethane grade, fast-evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in polyurethane coatings and in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate, HP is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.
Eastman™ Ethyl Acetate, Food Grade, Kosher is a colorless, fragrant solvent. This grade of ethyl acetate meets the monograph requirements for Ethyl Acetate, Food Grade Kosher, as set forth in the Food Chemical Codex (FCC) and supplements. It is manufactured, processed, packed and held under appropriate Good Manufacturing Practices for use as a food chemical. In addition, this grade of ethyl acetate is produced under rabbinical supervision and meets the requirements for Kosher and Pareve, including Passover.
Meets ISO and/or USP Class VI biocompatibility requirement
Eastar™ Copolyester MN211, Natural contains a mold release for improved ejection. It is a brilliantly clear polymer with good impact strength, chemical resistance, dimensional stability, and low shrinkage rates. The slower rate of crystallization of this material makes it excellent for use in hot runner systems with valve or thermal gates.
Eastman DP Solvent (Diethylene Glycol Monopropyl Ether) is a slow-evaporating, water-miscible solvent useful in solution and water-based coatings. It is an active solvent for many coating materials and demonstrates very good coupling efficiency with resin systems in water-based coatings. Additionally, its low odor is advantageous in formulating printing inks and can be used in aqueous cleaners.
Eastman™ EP Solvent (Ethylene Glycol Monopropyl Ether) is colorless and water-miscible over a wide range of temperatures with a slow evaporation rate. It is used in coatings and inks where a milder, less detectable odor is required and provides good viscosity control and high flash point. It can also be used to develop customized aqueous cleaners.
Eastman™ Triacetin is used as a plasticizer for cellulosic resins and is useful for imparting plasticity and flow to laminating resins. It is also used as a plasticizer for vinylidene polymers and copolymers. It is an ingredient in inks for printing on plastics, and as a plasticizer in nail polish.
Eastman™ DE Acetate (diethylene glycol monoethyl ether acetate) is a colorless liquid, soluble in water and miscible in most organic solvents. It is primarily used as a coalescing aid in paints and as a solvent in inks. With broad resin solubility, it is suitable for use in coil coatings.
Eastar™ copolyester meets ISO and/or USP Class VI biocompatibility requirement; Food Contact Status compliant
Eastar is a clear, amorphous material that can be molded and extruded with ease. Its excellent performance properties include clarity, toughness, good melt strength, no dusting, no stress whitening, good heat sealability, easy cutting and thermoforming. Eastar may be colored using color concentrates, dry colors, or liquid colorants. Eastar can be safely sterilized with proper ethylene oxide, radiation, or electron beam methods without property loss or color shift. It is well suited for medical packaging.
Eastman Tritan™ Renew TXHF-25 is a high flow grade of Eastman Tritan. Tritan Renew TXHF-25 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX, as well as Tritan Renew TX-25 and TX-50. Eastman Tritan Renew TXHF-25 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TXHF-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TXHF-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastman™ Yeast Control LF2 provides wide-ranging efficacy against spoiling organisms. Unbuffered formic acid drops feed pH efficiently enabling formation of undissociated organic acid molecules which disturb cell functions of spoiling flora thus hindering their growth. Eastman Yeast Control LF2 is especially needed when moist by-products of food industry are delivered to farms to be used within several days. Typically, in those circumstances microbial contamination easily happens and due to the properties of the feed micro-organisms can rapidly multiply consequently spoiling the feed. Eastman Yeast Control LF2 can efficiently improve shelf life of the feed, especially when used before severe multiplication of the spoiling organism. Therefore, the product application should preferably take place already on the feed production site.
Eastman Cellulose Acetate Butyrate (CAB-381-0.1, food contact) is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels are needed. CAB-381-0.1, food contact is used when lower viscosity for higher solids formulations and increased toughness with excellent surface hardness is desired. It is supplied as a dry, free-flowing powder.
Eastman Cellulose Acetate CA-398-3, food contact is one of the lower viscosity solution grades of cellulose acetate with an average ASTM viscosity of 3 seconds. Blended with appropriate solvents, plasticizers, and other modifying resins, it is used in coatings formulations for a variety of substrates. This multipurpose rheology enhancer provides high strength and good resistance to ultraviolet light, heat, oils and greases.
INCI: retinyl linoleateA naturally derived pro-retinol composed of retinol and high-purity linoleic acid from safflower oil, Eastman GEM retinyl linoleate is a biobased, formulation-stable, easy-to-handle, nonirritating antiaging ingredient. At room temperature, it is a pourable liquid and is supplied as a high-purity (>95%) assay; therefore, it is free of solvent, diluents, and carriers.Eastman GEM retinyl linoleate is approved in China.
Eastman GMX201 Copolyester contains a mold release derived from vegetable-based sources. A versatile polymer, the properties of Eastman GMX201 Copolyester enable it to be used in a broad array of manufacturing processes including injection molding, injection stretch blow molding, reheat stretch blow molding, and extrusion. The unique impact and heat resistance properties of Eastman GMX201 Copolyester can extend the life span of containers that are historically viewed as single use products.
Eastman DN500 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, DN500 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates.
Eastman Membrane Material M230 is a high-viscosity, high molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane, especially for osmotic and gas filtration applications..
For applications that require food contact compliance, please refer to Eastman Membrane Material M230, Food Contact.
Eastman Membrane Material M203 is a low viscosity, low molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane, especially for osmotic and gas filtration applications.
For applications that require food contact compliance, please refer to Eastman Membrane Material M203, Food Contact.
Eastman Membrane Material M203, Food Contact is a low viscosity, low molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane.
This product is manufactured, stored, handled, and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.
For applications that do not require food contact compliance, please refer to Eastman Membrane Material M203.
Eastman Membrane Material M210, Food Contact is a medium viscosity, medium molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane.
This product is manufactured, stored, handled and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.
For applications that do not require food contact compliance, please refer to Eastman Membrane Material M210.
Eastman Membrane Material M230, Food Contact is a high-viscosity, high molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane.
This product is manufactured, stored, handled and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.
For applications that do not require food contact compliance, please refer to Eastman Membrane Material M230.
Eastman membrane material M300 is a high-viscosity, high molecular weight cellulose triacetate. It is supplied as dry pellets. Its high purity permits manufacturing of membranes with improved quality control.
This product is manufactured, stored, handled and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.
For applications that do not require food contact compliance, please refer to Eastman Membrane Material M300.
Eastman Membrane Material M210 is a medium viscosity, medium molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane, especially for osmotic and gas filtration applications..
For applications that require food contact compliance, please refer to Eastman Membrane Material M210, Food Contact.
Eastman Tritan™ Renew TX-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX-25 contains a mold release derived from vegetable based sources. This product's most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastman Tritan™ Renew TX-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX-25 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastman Cellulose Acetate Butyrate CAB-500-5 is a cellulose ester with high butyryl content, low hydroxyl content and medium viscosity. It produces a relatively soft, flexible film requiring little or no plasticizer in many applications and offers a wide range of solubility and compatibility. It is useful in leather coatings and as a flow control additive in polyurethanes.
Eastman Cellulose Acetate Butyrate CAB-551-0.2 is a cellulose ester with high butyryl content and relatively low molecular weight. Its good compatibility with various resin systems and its solubility in a wide variety of solvents makes it useful as an additive in numerous coating compositions, including high-solids and thermoset coatings, and as a modifier for UV-curing systems.
Eastman Cellulose Acetate Butyrate CAB-321-0.1 is a cellulose ester with a low butyryl content (32.5%) and low molecular weight. Designed for use in automotive basecoats, it is resistant to attack and resistant to redisolve by solvents typical in clearcoats. It has a viscosity of 0.10 sec and 0.38 poise. CAB-321-0.1 is supplied as a fine white powder.
Eastman Eastar™ Renew DN501-50 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, Eastar™ Renew DN501-50 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Eastar™ Renew DN501-50 is also ideally suited for two-shot molding due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastar™ Renew DN501-50 contains a mold release derived from vegetable based sources.
Eastman Cristal™ One Renew-30 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One is recommended for thicker luxury bottles with complex shapes.
Meets ISO and/or USP Class VI biocompatibility requirement
Eastman Tritan™ MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Eastman Cristal™ One Pro MR is a copolyester product that contains mold release for ease of injection. It is designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to approximatively 12mm), while maintaining clarity and color.
Eastman Cristal™ One MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal One MR is recommended for thicker luxury bottles with complex shapes.
Eastman Eastar™ Renew DN501-10 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, Eastar™ Renew DN501-10 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Eastar™ Renew DN501-10 is also ideally suited for two-shot molding due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastar™ Renew DN501-10 contains a mold release derived from vegetable based sources.
Eastman Cristal™ One Renew-25 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-25 is recommended for thicker luxury bottles with complex shapes.
Eastman Cristal™ One Renew-25 MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-25 MR is recommended for thicker luxury bottles with complex shapes.
Eastman Cristal™ One Renew-50 MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-50 MR is recommended for thicker luxury bottles with complex shapes.
Eastman Cristal™ One Renew-30 MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-30 MR is recommended for thicker luxury bottles with complex shapes.
Eastman Cristal™ copolyester AN001 Natural has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but Eastman Cristal™ copolyester AN001 Natural maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. It is one of our premier materials for the cosmetics and personal care packaging market.
Eastman Advantis™ 343-3 25X adhesion promoter is a 25% solids solution of chlorinated polyolefin 343-3 in xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. Advantis 343-3 25X has a good solvent tolerance for a wide range of solvents. The high chlorine content of Advantis 343-3 25X gives improved compatibility with co-resins. It is also recommended as stir-in additive to promote adhesion to PP-based substrates.
Eastman Advantis™ 343-3 50X adhesion promoter is a 50% solution of chlorinated polyolefin in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. Eastman Advantis 343-3 50X adhesion promoter has a good solvent tolerance for a wide range of solvents. High chlorine content in Advantis 343-3 50X gives improved compatibility with co-resins. It is also recommended as stir-in additive to promote adhesion to PP-based substrates.
Eastman™ SAIB-90EA is a stable liquid that has a light color, as well as good thermal, hydrolytic, and color stability. It is a blend of sucrose acetate isobutyrate with about 10% ethyl acetate, providing a low viscosity liquid that is easy to work with. It is well-suited for coatings and nail polish lacquers.
Eastman DB Acetate (Diethylene Glycol Monobutyl Ether Acetate) is a high-boiling ester widely used as a solvent in printing inks and high-bake enamels; it is also used as a coalescing aid in low pH latex paints. It is especially applicable in screen inks and as a component in coil coatings. It has also found use as a coalescing aid, a coil coating component, and in the separation of alcohols and ketones by distillation.
Eastman™ SAIB-90 (Sucrose Acetate Isobutyrate) is a stable liquid that has a light color, as well as good thermal, hydrolytic, and color stability. It is a blend of sucrose acetate isobutyrate with about 10% denatured ethanol, providing a low viscosity liquid that is easy to work with. This product is well-suited for coatings and nail polish lacquers.
Eastman™ MPK (Methyl n-Propyl Ketone) is a medium evaporating, urethane-grade solvent. It is an active solvent for most synthetic resins including acrylics, polyesters, cellulosics, epoxies, vinyls, and alkyds. Its high solvency, low density, and medium evaporation rate make it attractive as a letdown solvent for high-solids resins used in formulating coatings with low VOC content. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.
Eastman C-11 Ketone is a low-cost, slow-evaporating, low-density mixture of ketone solvents. It is useful as a retarder solvent for primers, coil coatings, maintenance coatings and high-solids enamels. In these coatings, it improves gloss and leveling, reduces orange peel, minimizes solvent popping, and helps reduce VOCs. In many coatings, it can be used alone or blended with other solvents to replace isophorone and dibasic esters. Eastman C-11 Ketone has good solvency for a wide range of resins including nitrocellulose, alkyds, polyesters, acrylics, epoxies, and some vinyl chloride/vinyl acetate copolymers. Compared with other solvents in the same evaporation range, C-11 Ketone often offers an economic advantage.
Eastman™ Triacetin, Food Grade is used as an ingredient in many food and cosmetic products. Its high solvency power and low volatility make triacetin a good solvent and fixative for many flavors and fragrances. One of its main uses is as a plasticizer in chewing gum.
Eastman Cellulose Acetate CA-398-3 is one of the lower viscosity solution grades of cellulose acetate with an average ASTM viscosity of 3 seconds. Blended with appropriate solvents, plasticizers, and other modifying resins, it is used in coatings formulations for a variety of substrates. This multipurpose rheology enhancer provides high strength and good resistance to ultraviolet light, heat, oils and greases.
Eastman Tritan™ Renew TX-50 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Eastman Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastman Tritan™ Renew TX-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastman Eastar™ Renew BR003-30 copolyester is a brilliantly clear copolyester for toothbrushes specifically designed for brands and manufacturers who demand a more sustainable plastic material. Eastar™ Renew BR003-30 copolyester is identical in clarity, resistance to toothpaste and mouthwash, and in processing ease to Eastar™ BR003, which oral care brands around the world have come to count on for their simple and complex toothbrush designs.
Eastman Tritan™ Renew TX-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastman Tritan™ Renew TXHF-50 is a high flow grade of Eastman Tritan. Tritan Renew TXHF-50 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX, as well as Tritan Renew TX-25 and TX-50. Tritan Renew TXHF-50 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TXHF-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TXHF-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
EASTMAN RP100 Performance Additive is an extremely low odor, low emission and multi-functional product for broad sport surface applications. It is compatible with a wide variety of binders and formulations to provide superior viscosity reduction. It enables application easiness of variable sport surface formulas while providing better defoaming,levelling and a solution to resolve low temperature application constraints. It is capable of improving sport surface mechanical performance while achieving good balance between elasticity and strength.
Eastman Cristal™ copolyester EN067 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin. This product is suitable for thinner-walled molded parts for the cosmetics and personal care market.
Eastman Cristal™ EB062 copolyester is a resin specifically developed for extrusion-blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Cristal EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications.
Eastman Cristal™ copolyester AN014 Natural is a high flow product that contains a mold release. Other outstanding features of Eastman Cristal™ copolyester AN014 Natural are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. Eastman Cristal™ copolyester AN014 Natural is approved for food contact. Eastman Cristal™ copolyester AN014 Natural flow lengths are increased 20-40% relative to Eastman Cristal™ copolyester AN004 as shown by spiral flow testing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Eastman Cristal™ copolyester AN014 Natural may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177..
Eastman Cristal™ Renew EB062-50 copolyester is a resin specifically developed for extrusion blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Cristal EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications.
Eastman Cristal™ One is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal One is recommended for thicker luxury bottles with complex shapes.
Eastman Cristal™ One Renew-50 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One is recommended for thicker luxury bottles with complex shapes.
Eastman Triacetin Renew 59 is used as a plasticizer for cellulosic resins and is compatible in all proportions with cellulose acetate, nitrocellulose, and ethyl cellulose. It is useful for imparting plasticity and flow to laminating resins, particularly at low temperatures, and is also used as a plasticizer for vinylidene polymers and copolymers. Eastman Renew plasticizers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency that tracks sustainable content in a variety of industries.
Eastman 168™ Renew 20 non-phthalate plasticizer performs as good as or better than most ortho-phthalate plasticizers. In general-purpose plasticizer applications, it offers good performance properties, excellent low-temperature flexibility, resistance to extraction by soapy water, and excellent nonmigration properties. Eastman Renew plasticizers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency that tracks sustainable content in a variety of industries. Renew plasticizers are produced with ISCC-certified circular content by mass balance allocation.
Are you interested in learning more about Elastic Polyester Resins For Consumer Electronics Coatings? Contact us today to secure an expert consultation!
Eastman Cristal™ One Renew-100 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance and contains 100% certified recycled content*. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One is recommended for thicker luxury bottles with complex shapes.
DuraStar™ Copolyester MN630 does not contain a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. It is easy to process with minimal drying time and has good toughness and chemical resistance.
Meets ISO and/or USP Class VI biocompatibility requirement
DuraStar™ Copolyester MN631 contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. Other features include toughness and chemical resistance. It is easy to process with minimal drying time and has good toughness and chemical resistance.
Meets ISO and/or USP Class VI biocompatibility requirement
Eastar™ Copolyester MN005 has excellent appearance and is nearly water-clear. It is easy to process and can fill intricate tools. Its most outstanding features are exceptional clarity, toughness, radiation resistance, chemical resistance and excellent color and property retention following gamma and e-beam sterilization. MN005 contains a mold release.
Eastman Optifilm™ enhancer 300 is a low odor coalescent that is safe, efficient and nonyellowing. Used in a variety of latex types, it is also compatible with solvent borne resins, improving the rheology, flexibility, and adhesion of coatings based on these resins. Eastman Optifilm™ enhancer 300 is VOC-exempt under the European Union Decopaint directive and Solvent Emissions Directive, the Australian Paint Approval Scheme.
MCS-352B is a viscous assembly lubricant for components and equipment designed to use Skydrol aviation hydraulic fluids. This product is only supplied through distributors. North America region inquiries can be directed to TBM and Europe region inquiries to Boeing Distribution Services. Both distributors are authorized to repackage and distribute MCS-352B within their respective regions. Refer to the distributor listing on www.Eastman.com/Aviation for their contact information.
Eastman Turbo Oil ™ is designed to exceed the demand of current and future turbine engines. With over 400 million hours of in-flight experience, it is by far the most widely used HTS fleet oil in the world. Turbo Oil is manufactured in our own facility so you can rely on consistently high quality wherever you are in the world.
Eastman CHDM-D is a symmetrical, high molecular weight cycloaliphatic glycol used to make saturated and unsaturated polyester resins. It has also found use as a glycol modifier for resins containing Eastman NPG™ glycol. Good chemical, stain, humidity, and corrosion resistance is achieved when using CHDM-D in polyester-melamine baking enamels for appliance, general metal, and automotive coatings.
Eastman™ CHDM-D90 is a 90/10 weight % solution of CHDM-D in water. It is a liquid at room temperature for easier handling. This symmetrical, high molecular weight cycloaliphatic glycol is used to make saturated and unsaturated polyester resins. It is commonly used as a glycol modifier for resins containing Eastman NPG™ glycol. The 10 weight % water is removed during heating of the resin reaction mixture. Good chemical, stain, humidity, and corrosion resistance is achieved when using CHDM-D90 in polyester-melamine baking enamels for appliance, general metal, and automotive coatings. It delivers good hydrolytic stability to waterborne polyester resins.
Eastman AQ™ 38S polymer offers superior water resistance with the following characteristics: ultrafine dispersions, excellent film formation properties, water phase dispersion, emulsifier function for organic materials such as organic UV absorbers with no neutralization needed. Because of its low Tg, it forms flexible films on the skin; imparts a smooth feel to creams, lotions, and sprays; and adheres to the skin. It provides excellent water resistance in sunscreen products.
Eastman AQ™ 55S polymer is a water-dispersible sulfopolyester that has good film integrity when combined with other cosmetic ingredients. It is the preferred AQ polymer to improve water and smudge resistance of water-based makeup and mascaras, and in hairstyling products, it provides excellent hold under high-humidity conditions and tunable firmness. It has a Tg of about 55° C. The "S" indicates the product is supplied as solid pellets.
Eastman AQ™ Ultra polymer is a sulfopolyester that disperses directly in a mixture of ethanol and water at room temperature or in warm water without the assistance of surfactants or other additives. It is designed specifically for use as a hair fixative in low-VOC (<55%) hair spray. AQ 48 can also be used to formulate clear styling gels.
Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 371-12 contains a mold release and has a plasticizer level of 12%.
Eastar™ BR003 copolyester contains an additive that provides optimum molding efficiency. It has excellent appearance and is nearly water clear. With superior chemical resistance, it maintains its physical properties and appearance when exposed to aromatic oils. BR003 is specifically formulated to provide the optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes. It also offers greater design flexibility and can work for virtually any toothbrush configuration; as a result, brands can offer unique models that are tough to replicate—and launch them quicker. With BR003, molders can also consolidate resins versus having single resins for single designs.
Eastman™ Butyric acid (C3H7COOH) is a clear, colorless liquid, with a strong pungent odor. Esters and salts of butyric acid are used in a variety of applications including perfumes, flavorings, and animal feeds. Eastman offers a variety of grades of butyric acid appropriate for these various end uses.
Eastman Tritan TX is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Eastman Tritan TX is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Eastar™ EN058 Copolyester is a copolymer PET. It is crystallized and has an lntrinsic Viscosity of 0.58. Eastar™ EN058 copolyester is tailored to meet the need of the injection-molded cosmetics and personal care market. Eastar™ EN058 is crystallized to allow faster, high-temperature drying. Its high-flow characteristics allow faster cycle times.
Meets ISO and/or USP Class VI biocompatibility requirement
Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release.
Eastman Tritan™ TX is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Eastman Tritan(tm) TX is an amorphous copolyester with excellent appearance and clarity. Tritan TX contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Eastman Spectar™ copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.
Benzoflex™ 354 is compatible with a wide range of synthetic resinous materials and imparts a softening and flexibilizing effect to these resins. It is suggested for use as a resin plasticizer/modifier in the formulation of specialty coatings and adhesives and polyvinyl chloride plastisols. It is also a non-bleeding plasticizer for vinyl plastisol printing inks used to decorate T-shirts.
Benzoflex™ imparts the highest stain resistance of any plasticizer used in PVC or in PVC acetate copolymers. Its high resin solvation at elevated temperatures, coupled with its tolerance for fillers, makes it the plasticizer of choice for wall coverings and for sheet vinyl floor coverings.
Benzoflex™ LC-531 plasticizer is formulated specifically for latex caulks. It was designed to pass the stringent performance requirements for caulk outlined in ASTM C- 920 and ASTM C-834. It meets all of these performance requirements and is more environmentally friendly than other plasticizers for this application.
Benzoflex™ RF-532 is a benzoate ester specifically designed for resilient vinyl flooring applications. Benzoflex™ RF-532 is a high solvating plasticizer that may be used in foam, clear or wear layers. Incorporation into the wear or clear layers of a construct imparts excellent stain and UV resistance. Foam layers produced with Benzoflex™ RF-532 are of superior quality.
Eastman™ Dioctyl Maleate is a co-monomer normally used in polymerization with vinyl acetate, vinyl chloride, styrene and derivatives of acrylic and methacrylic acids. It can be used in applications such as latex paints and textiles as well as a specialty plasticizer.
Probenz™ SP Powder sodium benzoate is an established food preservative. It is primarily used as a preservative in the food and beverage industries as well as in personal care applications. It is also used as a preservative in pharmaceutical and other applications where a powder form is preferred.
Meets ISO and/or USP Class VI biocompatibility requirement
Eastman Tritan™ MX810 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Meets ISO and/or USP Class VI biocompatibility requirement
Eastman Tritan™ MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress.
Eastman Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. Meets ISO and/or USP Class VI biocompatibility requirement
Skydrol™ 500B-4 is the most worker friendly of the aviation phosphate esters; it is least irritating to skin and less prone to form mists which can be irritating to the respiratory tract .
Eastman Scandinol™ DOM is a co-monomer normally used in polymerization with vinyl acetate, vinyl chloride, styrene and derivatives of acrylic and methacrylic acids. It can be used in applications such as latex paints and textiles as well as a specialty plasticizer.
Chemical name:Hexamethylene-1,6-bis(thiosulphate),disodium salt, dihydrate
Molecular weight: 390
Duralink™ HTS is used in sulfur-based vulcanization systems to generate hybrid crosslinks which provide increased retention of physical and dynamic properties when exposed to anaerobic conditions at elevated temperatures such as those experienced during overcure, when using high curing temperatures or during product service life.
Eastman Cristal™ Renew EB062-99.8 copolyester is a resin specifically developed for extrusion blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Cristal EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications.
Benzoflex™ 172 is an alkyl benzoate ester with low odor, low color, low viscosity and excellent compatibility with PVC. Benzoflex™ 172’s principal use is as viscosity reducer and plasticizer for PVC plastisols applications. Benzoflex™ 172 may also be used in other applications that require a low viscosity, high solvating plasticizer. These include polyurethane and lubricating oil formulations.
Eastman Spectar™ Renew -15 copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar™ -15 is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.
Eastman Ecdel™ elastomer Renew-50 meets ISO and/or USP Class VI biocompatibility requirement
Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. Eastman Ecdel™ elastomer Renew-50 medium inherent viscosity makes it a good general purpose elastomer. Ecdel may be injection molded or extruded.
Naturally derived, non-microplastic biodegradable1, and non-nano2 cellulose ester micropowder. When added to cosmetic and personal care products Eastman Esmeri™ CC1N10 provides long-lasting soft focus properties and leaves a matte skin finish while improving texture and sensorial experience. 1In compliance with (EU) / "Synthetic Polymer Microparticles" 2 According to EC recommendation of (/C 229/01)
Eastman Solus™ performance additive is a cellulose ester that is designed to perform well in demanding applications. The unique attributes of this product enable clear non-yellowing films, good UV stability, minimized cratering and strong inter-coat adhesion. With a low Tg (glass transition temperature) and low M(n), it is compatible with many other coating components and numerous cross-linking resins, offers low solution viscosity in a wide range of solvents & solvent combinations, and improves flow & thermal reflow.
Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ ES-65 performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. The robust properties of this distinctive material provide reduced surface tack, improved flow, and good UV stability. This cellulose ester enables lower solution viscosities with the lowest glass transition temperature (Tg) in the cellulose acetate butyrate portfolio. The relatively low molecular weight (M(n)) of Solus™ ES-65 (as compared to other cellulose esters) supports compatibility with other formulation components, including a wide range of cross-linking resins and curing resin systems. Solus™ ES-65 is available in pellet form.
Eastman Solus™ performance additive is designed to provide high-performance in building and construction coatings. This cellulose ester enables coatings to exhibit UV stability & non-yellowing, excellent inter-coat adhesion, clear films, and superior avoidance of surface defects via flow & leveling properties. Production benefits include reduced surface tack, improved thermal reflow, broad compatibility with curing resins & other coating components, low solution viscosity and solubility in a wide range of solvents & solvent combinations. When dissolved in appropriate solvents, a clear colorless solution is produced. Solus™ is supplied in pellet form, offering formulation convenience, ease of handling and maximum formulating flexibility. Eastman Solus™ is based on cellulose, one of the most abundant natural renewable resources. For applications that require food contact compliance, please discuss requirements with your Eastman technical expert.
Brands today are seeking to differentiate in a crowded market, and coatings that are eye-catching, high-quality and durable under a wide range of situations can help these brands to stand out. Eastman Solus™ performance additive is designed to provide high-performance in consumer products. This Solus™ product is useful for lacquers for glass, plastic and wire, and it enables coatings with a clear non-yellowing film, strong avoidance of surface defects as a result of flow and levelling properties, minimized cratering, good UV stability and superior inter-coat adhesion.
Brands today are seeking to differentiate in a crowded market, and coatings that are eye-catching, high-quality and durable under a wide range of situations can help these brands to stand out. Eastman Solus™ performance additive is designed to provide high-performance in consumer products.
Brands today are seeking to differentiate in a crowded market, and coatings that are eye-catching, high-quality and durable under a wide range of situations help these brands to stand out. Eastman Solus™ performance additive is designed to provide high-performance in consumer products, electronics and plastic coatings.
Modern consumer and industrial products must deliver on both high consumer-expectations for performance & appearance, as well as manufacturers' need for efficient production. Eastman Solus™ performance additive is designed to provide this high-performance in demanding consumer & industrial products, distinguished as a result of excellent surface hardness, moisture resistance and good film strength.
Eastman Solus™ performance additive is designed as a rheology control additive for high solids 2K coatings. It is a dry, free-flowing powder that is convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems.
Eastman cellulose acetate CA-394-60S is an unfiltered, pelleted ester that is used as a raw material in many Eastman processes. CA-394-60S can be used to make acetate dope for spinning yarns and fiber, or ground and blended with other material(s) produced at Eastman, thus creating a product that is suitable for food contact applications. The ground ester may also be sold externally for food contact applications.
Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ ES-65 performance additive, food contact is designed to deliver on the high performance expectations required of ink and metal packaging formulations. The robust properties of this distinctive material provide reduced surface tack, improved flow, and good UV stability.
Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. Formulations based on Solus™ tend to offer excellent grease, oil, and chemical resistance. This cellulose-based additive has a relatively lower level of solubility compared to other members of the Solus™ family, with primary solubility in chlorinated hydrocarbons, ketones, and nitroparaffins. Solus™ is delivered as a free-flowing powder, and delivers a clear, colorless solution when dissolved in appropriate solvents. Eastman Solus™ is based on cellulose, one of Earth's most abundant natural renewable resources, with a calculated bio-content of over 45%. For applications that require food contact compliance, please discuss requirements with your Eastman technical representative.
Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. This cellulose-based additive enables formulations that deliver toughness, good resistance to marring, superior flexibility, and desirable dimensional stability.
Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. This cellulose-based additive enables formulations with good resistance to UV discoloration, excellent hardness and anti-blocking properties in support of high production speeds. Solus™ is well adapted for use in printing inks and overprint varnishes as a result of its wide solubility in relevant solvents, strong compatibility with other ink resins, desirable resistance to grease and oil, low odor properties, and high melting point. When Solus™ is dissolved in appropriate solvents a clear, colorless solution is produced. Supplied as a dry free-flowing powder, this product is often used in combination with other Solus™ products to optimize the formulation viscosity. Eastman Solus™ is based on cellulose, one of Earth's most abundant natural renewable resources, with an approximate calculated bio-content value of 45%. For applications that require food contact compliance, please refer to Eastman Solus™ , food contact and discuss requirements with your Eastman technical representative.
Eastman Solus™ performance additive is designed to deliver on the high performance expectations required of modern formulations across various adhesive applications. Solus™ is soluble in a range of solvents and solvent combinations, and due to its higher flexibility, may enable reduced plasticizer modification than other resins.
Eastman Tritan™ DA001 is an amorphous copolyester that offers excellent clarity, toughness, flexibility and chemical resistance needed for use in medically extruded film applications. Film and sheet manufactured from Tritan™ DA001 can be thermoformed with a wide processing window that allows for product designs that reflect intricate detail. This product also meets ISO and/or USP Class VI biocompatibility requirement.
Huntsman’s MDI-based rigid polyurethane foam plays a critical role in reducing food waste and extending the life of perishable goods. Our rigid foam provides outstanding thermal insulation properties, leading to its widespread application throughout the supply chain of perishable goods – from the refrigerated processing plants to the insulated storage warehouses and walk-in freezers, to refrigerated transport vehicles, storage pods and grocery store freezers.
From grocery stores to consumers’ dining tables, our foams are used in cool boxes and domestic refrigerators to keep food fresh and tasty.
Learn MoreHunstman offers a wide range of MDI-based polyurethanes products that are used in building, construction and infrastructure applications. MDI-based polyurethane is the most effective insulant available in the market and so is widely used to provide energy saving solutions in residential and commercial buildings. Polyurethane insulation is used in roofs, interior and exterior walls, floors, doors and ceiling cavities, pipes, as well as building exterior applications, in both new and retrofit construction projects. Our insulation products also increase a building’s air quality, reduce moisture infiltration, and make buildings stronger and quieter.
The outstanding thermal insulation qualities of MDI-based polyurethane foam have seen its use in district heating systems – where it insulates the huge pipes that are used to transport energy – increase significantly in recent years.
Huntsman is a pioneer in composite wood products, including medium-density fiberboard, particleboard and oriented strand board, which are produced using MDI resins. Composite wood products are used in building and construction to replace steel joists and beams.
Our MDI-based coatings are used to seal floors, decks and driveways, providing protection and extending the life of the surface. And our thermoplastic polyurethanes (TPUs) are used to protect cables and wires in residential, commercial and industrial buildings.
Learn MoreHuntsman’s thermoplastic polyurethanes (TPUs) are widely used in a variety of consumer electronics, due to their excellent durability, flexibility, pleasant haptics, soft touch and grip – from the household wiring that runs low-amp domestic appliances to the molded parts found in your TV, computers and hand-held devices. Additionally, TPUs can be found in cable power systems, protective cases, printed circuit boards and other technical parts used in medical, technology, smart fabrics, wearables, IoT (Internet of Things) and other consumer electronic devices, including plasma screens, mobile phones, smart watches, tablets and laptops. Other TPU characteristics include scratch, abrasion and impact resistance, good vibration absorption and chemical resistance. TPUs can also be formulated for specific functionality such as flame retardancy, anti-static or conductive, transparency and matte finish.
Learn MoreHuntsman’s MDI and polyols are the key ingredients in the production of flexible polyurethane foam, a highly versatile cushioning material used in furniture, mattresses and pillows. Huntsman works in close partnership with customers to ensure that consumer needs for comfort are constantly improved. Within the polyurethane formulated systems, our pioneering JEFFCAT® catalysts provide emissions reduction, performance and power for polyester, polyether and viscoelastic applications.
Our innovative formaldehyde-free MDI resins deliver significant improvements in the production and performance of furniture-grade Medium Density Fiberboard (MDF), High Density Fiberboard (HDF) and Particleboard (PB), that are widely used in furniture production for the home and the office.
If you want to learn more, please visit our website water-based epoxy resins.
Learn More